• First release

• NEW calibration procedure -- added 2 dB to V0 due to the 75 ohm cable as observed in the BW test on ground

• Fix a bug in Epoch times in SOLO_L1_RPW-HFR-SURV

• First release

• Reads the validity file from each team to obtain the calibration filename to use.

• Add a factor four to compensate the use of Hanning window

• Add all the products in SRF frame

• Fill MODS global attributes

• First release

• Calibration improved.
• Now BP1 are divided by ASM frequencies.
• Days with only burst mode are now correctly computed.
• Reads the validity file from each team to obtain the calibration filename to use.

• Add NVEC in SRF frame

• Add a factor four to compensate the use of Hanning window for PB and PE

• Correct calibration of BP1 Sx

• Fill MODS global attributes

• First release

• Calibration improved at F2 frequencies. Now BP1 are divided by ASM frequencies.
• Days with only burst mode are now correctly computed.
• Reads the validity file from each team to obtain the calibration filename to use.

• Add a factor four to compensate the use of Hanning window
• Add all the products in SRF frame
• Fill MODS global attributes

• First release

SCMCAL V0.12.1

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• uses V13 skeletons
• the SCMCAL version comes from the descriptor and not from the configuration file
• the names of the CDF masters are given by the "template" keys in the descriptor file (and not in the configuration file)
• optimization of the computation time of CalibrateWave()
• optimization, transfer functions and transfer matrices were recalculated when not needed.
• improves the calibration of continuous waveforms (by overlapping)
• improves the calculation of Brtn (the M_scm_rtn matrix is calculated every second)
• corrects CALIBRATION_TABLE_INDEX (which was wrong as soon as a change occurred during the file)
• resizes the output TDS snapshots
• accepts resized or not resized L1R TDS snapshots

• First release

BICAS V3.1.0

• Zero order AC data de-trending (remove mean; previously removed linear fit), but no AC data re-trending. This removes earlier artificial offsets and artificial linear components, in particular in snapshots.
• Using improved fits and extrapolations of the BIAS AC transfer functions, in particular for low frequencies.
• Using modified inverted transfer functions for AC data below 7 Hz (constant gain) to prevent low frequency noise from being amplified.
• Sets quality variables based on manually identified thruster firings.
• Better CDF standards compliance.

• First release

SCMCAL V0.12.1

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• uses V13 skeletons
• the SCMCAL version comes from the descriptor and not from the configuration file
• the names of the CDF masters are given by the "template" keys in the descriptor file (and not in the configuration file)
• optimization of the computation time of CalibrateWave()
• optimization, transfer functions and transfer matrices were recalculated when not needed.
• improves the calibration of continuous waveforms (by overlapping)
• improves the calculation of Brtn (the M_scm_rtn matrix is calculated every second)
• corrects CALIBRATION_TABLE_INDEX (which was wrong as soon as a change occurred during the file)
• resizes the output TDS snapshots
• accepts resized or not resized L1R TDS snapshots

• First release

BICAS V3.1.0

• Zero order AC data de-trending (remove mean; previously removed linear fit), but no AC data re-trending. This removes earlier artificial offsets and artificial linear components, in particular in snapshots.
• Using improved fits and extrapolations of the BIAS AC transfer functions, in particular for low frequencies.
• Using modified inverted transfer functions for AC data below 7 Hz (constant gain) to prevent low frequency noise from being amplified.
• Sets quality variables based on manually identified thruster firings.
• Better CDF standards compliance.

• First release

SCMCAL V0.12.1

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• First release

• First release

SCMCAL V0.12.1

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• Fixes all known bugs in SWF data products, e.g., VOLTAGE data is filled, calibration bugs fixed. New calibration tables are released. They are not replacing the previous ones, but extending valid calibration after the TDS flight software update, i.e., old tables are still used before October 20, 2021. Some minor changes in global and variable attributes have been made, e. g. Parents and Data version global attributes are fixed. Parent_version global attribute is omitted.

• First release

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• First release

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• uses V13 skeletons
• the SCMCAL version comes from the descriptor and not from the configuration file
• the names of the CDF masters are given by the "template" keys in the descriptor file (and not in the configuration file)
• optimization of the computation time of CalibrateWave()
• optimization, transfer functions and transfer matrices were recalculated when not needed.
• improves the calibration of continuous waveforms (by overlapping)
• improves the calculation of Brtn (the M_scm_rtn matrix is calculated every second)
• corrects CALIBRATION_TABLE_INDEX (which was wrong as soon as a change occurred during the file)
• resizes the output TDS snapshots
• accepts resized or not resized L1R TDS snapshots

• Fixes all known bugs in SWF data products, e.g., VOLTAGE data is filled, calibration bugs fixed. New calibration tables are released. They are not replacing the previous ones, but extending valid calibration after the TDS flight software update, i.e., old tables are still used before October 20, 2021. Some minor changes in global and variable attributes have been made, e. g. Parents and Data version

SCMCAL V1.0.0

(TDS_CALBA V2.2.1)

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• Fixes all known bugs in SWF data products, e.g., VOLTAGE data is filled, calibration bugs fixed. New calibration tables are released. They are not replacing the previous ones, but extending valid calibration after the TDS flight software update, i.e., old tables are still used before October 20, 2021. Some minor changes in global and variable attributes have been made, e. g. Parents and Data version global attributes are fixed. Parent_version global attribute is omitted.

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• First release

SCMCAL V0.12.1

• Corrects gAttr TIME_MIN and TIME_MAX
• Improves the accuracy of the time range where the heaters alter the magnetic measurements (bit1 of L2_QUALITY_BITMASK)

• uses V13 skeletons
• the SCMCAL version comes from the descriptor and not from the configuration file
• the names of the CDF masters are given by the "template" keys in the descriptor file (and not in the configuration file)
• optimization of the computation time of CalibrateWave()
• optimization, transfer functions and transfer matrices were recalculated when not needed.
• improves the calibration of continuous waveforms (by overlapping)
• improves the calculation of Brtn (the M_scm_rtn matrix is calculated every second)
• corrects CALIBRATION_TABLE_INDEX (which was wrong as soon as a change occurred during the file)
• resizes the output TDS snapshots
• accepts resized or not resized L1R TDS snapshots

• Fixes all known bugs in SWF data products, e.g., VOLTAGE data is filled, calibration bugs fixed. New calibration tables are released. They are not replacing the previous ones, but extending valid calibration after the TDS flight software update, i.e., old tables are still used before October 20, 2021. Some minor changes in global and variable attributes have been made, e. g. Parents and Data version global attributes are fixed. Parent_version global attribute is omitted.

SCMCAL V1.0.0

(TDS_CALBA V2.2.1)

• First release

• Bug in CHANNEL_OVERFLOW flag for waveform snapshots fixed. Antenna lengths for RPW_ANTENNA_RTN data in snapshot waveforms added. Now both directions in RTN and effective lengths are provided.
• Feature to process the resized L1 files for the redundant LFM modes implemented.
• New calibration table released. A major problem in calibrations of MAMP, STAT, HISTxD fixed (mismatch in a calibration table). CHANNEL_CONFIG replaced by CHANNEL_REF in all concerning data products. TDS antenna configuration is now represented by number (e.g. 10 = ANT1-GND or 23 = ANT2-ANT3). Feature to process the resized L1 files implemented.
• Signs for waveform and voltage snapshots fixed. Some issues with the ISTP/SPDF compliance resolved, metadata variables added dimensions for existing zVars changed.
• Mandatory Global Attributes filled. Mismatch in modes for the waveform snapshot calibration fixed. Time vector in MAMP product adequately created.
• The first SOAR release (known bugs: bad sign for VOLTAGES in all waveform snapshots. Bad calibrations for MAMP and STAT for some of the TDS modes. Incorrect time vector for MAMP. BAD flag for CHANNEL_OVERFLOW in MAMP, TSWF and RSWF data products).

• Fixes all known bugs in SWF data products, e.g., VOLTAGE data is filled, calibration bugs fixed. New calibration tables are released. They are not replacing the previous ones, but extending valid calibration after the TDS flight software update, i.e., old tables are still used before October 20, 2021. Some minor changes in global and variable attributes have been made, e. g. Parents and Data version global attributes are fixed. Parent_version global attribute is omitted.

• First release

• NEW calibration procedure -- factor 2 in the voltage V0 (input voltage for the calibration)
• Corrections on max/min in gattrs writing; remove gattrs1 from antennas_params
• Variable FREQUENCY added