Dateoct. 12, 2017
Demandes

Getting issues...


Context

Preparation of the SVT1-A datapackage release for RPW.

  • The SVT1-A campaign for RPW is expected to occur on May 2, 2019. It will be driven by MOC from ESOC site (Darmstadt, Germany).
  • The RPW PFM model integrated on the S/C will be used for the test.
  • No specific equipment is requested to the instrument teams (IT) to perform the test. MOC will use its own infrastructure.
  • The ROC team will have to deliver the SVT1 datapackage, then support the MOC team in the preparation, execution and analysing of the test. Presence of ROC team at ESOC during test is TBD.
  • All of the RPW TC will have to be tested during the SVT1 (see Summary of TC versus Sequences for the full list). Especially, the TC sequences for the commissioning and cruise phase will have to be delivered.
  • Test plan and report will be written by the MOC. ROC will participate to the possible anomaly investigations related to RPW. A ROC internal test report for SVT1 will have to be written and stored in the ROC document management system (https://ged.obspm.fr/j_obspm/docbase/topic/browse_classic?topicID=T80) at the end.

Interlocutors are:

  • Sylvain Lodiot at MOC

RPW SVT1 datapackage expected content overview

  1. Upgraded RPW flight procedures from IGST42 datapackage
  2. New RPW flight procedures related to the instrument commissioning and cruise phase operations.
  3. Upgraded version of the RPW ISM
  4. SVT1 timeline for RPW
  5. First issue 1.0 of the RPW flight configuration description document (FCDD) (TBC)

Planning

  • A first set of RPW flight procedures for SVT1 is planned to be delivered by email to Sylvain Lodiot (MOC) on mid-October 2018.
  • The full SVT1 data package will have to be delivered before .

Assumption, constraints and limits

Forbidden TCs

Jean-Michel Travert : 

Si toutes les Antennes sont correctement connectées au moment du test alors on peut jouer toutes les TC.
Si une Antenne n'est pas connecté, il y a 2 consignes :
	- Ne pas démarrer l'antenne qui n'est pas connectée donc ne pas utiliser TC_DPU_SWITCH_ON_EQUIPMENT (CP_DPU_SWITCH_ON_EQ: 	RPW_ANTi_EID, …)
	- Ne pas mettre une valeur différente de 0 en consigne du BIAS donc ne pas utiliser TC_DPU_SET_BIASi et TC_DPU_SET_BIAS_SWEEP avec 	l'argument CP_BIA_SET_SWEEP_ENAB_Pi = ENABLED
Avec i qui correspond à l'antenne qui n'est pas connectée.
C'est les mêmes contraintes que celles qui sont appliquées par ADS dans les essais qu'ils font.

Status of the data package

RPW sequences status

Routine sequences

Sequence nameThemeDescriptionStatusLast sequence version delivered in packageComment
AIWF001ANominal switch OFF via OBCP

From SAFE mode switch OFF the RPW power interface (UNIT_A and UNIT_B ) via OBCP.

Delivered to MOC1.0
AIWF002AOther OFF proceduresFrom SAFE mode switch OFF the RPW power interface (UNIT_A and UNIT_B ) via manual. Delivered to MOC1.0
AIWF010ANominal switch ON via OBCPBoot RPW DBS in prime power interface (UNIT_A) via OBCPDelivered to MOC1.2
AIWF011ANominal switch ON via manualBoot RPW DBS prime power interface (UNIT_A) via manualDelivered to MOC1.2
AIWF030AModes transition (i.e., boot DAS and transition from SAFE to STANDBY mode)Boot RPW DAS from EEPROM1 (default), EEPROM2, RAMDelivered to MOC1.2
AIWF031ANominal Switch On equipmentEnter SERVICE mode and switch on all RPW equipment unitsDelivered to MOC1.2
AIWF032AConfiguration DPU and DASconfigure HK periodDelivered to MOC1.2

It might be necessary to create sequences for DAS configuration during commissioning if no FP can be used

AIWF032BConfiguration DPU and DASLoad DPU and DAS common parametersDelivered to MOC1.2
AIWF032CConfiguration DPU and DASLoad DPU and DAS power parametersDelivered to MOC1.2
AIWF032DConfiguration DPU and DASConfigure Bias High Voltage parameterDelivered to MOC1.2
AIWF032EConfiguration DPU and DASConfigure parameters for monitoring temperatureDelivered to MOC1.2
AIWF032FConfiguration DPU and DASConfigure Waveform parametersDelivered to MOC1.2
AIWF032GConfiguration DPU and DASConfigure SBM1 parametersDelivered to MOC1.2
AIWF032HConfiguration DPU and DASConfigure SBM2 parametersDelivered to MOC1.0
AIWF032IConfiguration DPU and DASConfigure SC potential computation algorithmDelivered to MOC1.0
AIWF032JConfiguration DPU and DASClear HK counterDelivered to MOC1.0
AIWF032KConfiguration DPU and DASDump DAS parametersDelivered to MOC1.2
AIWF033ACalibrationInternal Calibration for LFRDelivered to MOC1.2
AIWF033BCalibrationBIAS CalibrationDelivered to MOC1.4
AIWF033CCalibrationRun THR internal calibrationDelivered to MOC1.4
AIWF033DConfiguration BiasConfigure and execute the BIAS sweepDelivered to MOC1.4
AIWF033EConfiguration BiasLoad BIAS sweeping tableDelivered to MOC1.4

Discussion about the possibility to fix one or more table → we might create more sequences to load sweep table

AIWF034ADumpDump LFR, TDS, THR parametersDelivered to MOC1.2
AIWF034BDumpDump TDS Triggered snapshots in NORMAL modeDelivered to MOC1.6
AIWF034CDumpDump TDS Triggered snapshots in SBM2 modeDelivered to MOC1.2
AIWF034DDumpForce the Dump of SBM1 dataDelivered to MOC1.2
AIWF034EDumpDump k-coefficientsDelivered to MOC1.2
AIWF035AModes transition SCIENCEEnter in SCIENCE SURVEY_NORMAL submodeDelivered to MOC1.2
AIWF035BModes transition SCIENCEEnter in SCIENCE SURVEY_BURST submodeDelivered to MOC1.2
AIWF035CModes transition SCIENCEEnter in SBM_DETECTION modeDelivered to MOC1.2
AIWF036AConfiguration Bias CurrentConfiguration Bias currentsDelivered to MOC1.2
AIWF037AConfiguration THRConfigure THR for the RPW SCIENCE SURVEY_NORMAL mode : DEFAULTDelivered to MOC1.4
AIWF037BConfiguration THRConfigure THR for the RPW SCIENCE SURVEY_BURST mode : DEFAULTDelivered to MOC1.4
AIWF037CConfiguration THRLoad calibration parameters for THRDelivered to MOC1.2
AIWF037DConfiguration THRLoad GALAXY mode parameters configDelivered to MOC1.2
AIWF037EConfiguration THRConfigure THR for the RPW SCIENCE SURVEY_NORMAL mode : LOW-RATE 1Delivered to MOC1.7
AIWF037FConfiguration THRConfigure THR for the RPW SCIENCE SURVEY_NORMAL mode: LOW-RATE 2Delivered to MOC1.7
AIWF038AConfiguration TDSLoad common parameters of TDSDelivered to MOC1.2
AIWF038BConfiguration TDSConfiguration of TDS for SBM1 mode : DEFAULTDelivered to MOC1.0
AIWF038CConfiguration TDSConfiguration of TDS for SBM2 mode: DEFAULTDelivered to MOC1.0
AIWF038DConfiguration TDS

Configure TDS LFM parameters

Delivered to MOC1.0
AIWF038EConfiguration TDSConfigure TDS for the RPW SCIENCE SURVEY_NORMAL mode : DEFAULTDelivered to MOC1.0
AIWF038FConfiguration TDS

Configure TDS for the RPW SCIENCE SURVEY_BURST mode: DEFAULT

Delivered to MOC1.0
AIWF038GConfiguration TDSConfigure TDS for the RPW SCIENCE SURVEY_NORMAL mode : LOW-RATE 1Delivered to MOC1.7
AIWF038HConfiguration TDSConfigure TDS for the RPW SCIENCE SURVEY_NORMAL mode: LOW-RATE 2Delivered to MOC1.7
AIWF039AConfiguration LFRConfiguration of LFR for SBM1 mode: DEFAULTDelivered to MOC1.0
AIWF039BConfiguration LFRConfiguration of LFR for SBM2 mode: DEFAULTDelivered to MOC1.0
AIWF039CConfiguration LFRLoad common parameters of LFRDelivered to MOC1.0
AIWF039DConfiguration LFRConfigure LFR for the RPW SCIENCE SURVEY_NORMAL mode: DEFAULTDelivered to MOC1.2
AIWF039EConfiguration LFR

Configure LFR for the RPW SCIENCE SURVEY_BURST mode: DEFAULT

Delivered to MOC1.0
AIWF039FConfiguration LFRConfigure LFR for the RPW SCIENCE SURVEY_NORMAL mode: LOW-RATE 1Delivered to MOC1.7
AIWF039GConfiguration LFRConfigure LFR for the RPW SCIENCE SURVEY_NORMAL mode: LOW RATE 2Delivered to MOC1.7
AIWF040AConfiguration BiasConfigure the Bias (mode, and relay) for the RPW SCIENCE mode.Delivered to MOC1.4
AIWF041ACompressionEnable the compression of the waveform products.Delivered to MOC1.2
AIWF041BCompressionDisable the compression of the waveform products.Delivered to MOC1.0
AIWF042ASwitch On equipmentSwitch on the converter (CONV)Delivered to MOC1.2
AIWF042BSwitch On equipmentBOOT LFR from EEPROM1 (default), EEPROM2 and RAM + Enabled Verif BootDelivered to MOC1.2
AIWF042CSwitch On equipmentBOOT THR from EEPROM1 (default), EEPROM2 and RAM + Enabled Verif BootDelivered to MOC1.2
AIWF042DSwitch On equipmentBOOT TDS from EEPROM1 (default), EEPROM2 and RAM + Enabled Verif BootDelivered to MOC1.2
AIWF042ESwitch On equipmentSwitch ON BIASDelivered to MOC1.2
AIWF042FSwitch On equipmentPA Switch ONDelivered to MOC1.2
AIWF042GSwitch On equipmentSCM switch ONDelivered to MOC1.2
AIWF043AEnter SERVICE ModeEnter SERVICE modeDelivered to MOC1.2
AIWF044AEnter BACKUP ModeEnter in SCIENCE SURVEY_BACKUP submodeDelivered to MOC1.2
AIWF045AEnter STANDBY ModeEnter in RPW STANDBY mode from any other mode (except SAFE and OFF)Delivered to MOC1.2
AIWF046AEnter SAFE ModeGo to SAFE mode (DBS) with TC_DPU_RESET commandDelivered to MOC1.2Will probably move in CRP → wait for SL answer
AIWF047ASwitch off equipmentSwitch off HVDelivered to MOC1.2
AIWF047BSwitch off equipmentSwitch off TDSDelivered to MOC1.2
AIWF047CSwitch off equipmentSwitch off Bias PADelivered to MOC1.2
AIWF047DSwitch off equipmentSwitch off BiasDelivered to MOC1.2
AIWF047ESwitch off equipmentSwitch off LFRDelivered to MOC1.2
AIWF047FSwitch off equipmentSwitch off THRDelivered to MOC1.2
AIWF047GSwitch off equipmentSwitch off SCMDelivered to MOC1.2
AIWF047HSwitch off equipmentSwitch off ANT PA1Delivered to MOC1.2
AIWF047ISwitch off equipmentSwitch off ANT PA2Delivered to MOC1.2
AIWF047JSwitch off equipmentSwitch off ANT PA3Delivered to MOC1.2
AIWF047KSwitch off equipmentSwitch off CONVDelivered to MOC1.2
AIWF048ADBS configurationLoad and dump common parameters for DBSDelivered to MOC1.2
AIWF048BDBS configurationConfigure HK of DBS periodDelivered to MOC1.0
AIWF049AInter-equipment communicationEnable generation of inter equipment communication packetDelivered to MOC1.2
AIWF049BInter-equipment communicationDisable generation of inter equipment communication packetDelivered to MOC1.1
AIWF050AEnable/disable HKEnable HK generation for PDU unitDelivered to MOC1.0
AIWF050BEnable/disable HKEnable HK generation for LFRDelivered to MOC1.0
AIWF050CEnable/disable HKEnable HK generation for TDSDelivered to MOC1.0
AIWF050DEnable/disable HKEnable HK generation for THRDelivered to MOC1.0
AIWF050EEnable/disable HKEnable HK generation for S20Delivered to MOC1.0
AIWF050FEnable/disable HKEnable HK generation for OBCDelivered to MOC1.0
AIWF050GEnable/disable HKDisable HK generation for PDU unitDelivered to MOC1.1
AIWF050HEnable/disable HKDisable HK generation for LFRDelivered to MOC1.0
AIWF050IEnable/disable HKDisable HK generation for TDSDelivered to MOC1.0
AIWF050JEnable/disable HKDisable HK generation for THRDelivered to MOC1.0
AIWF050KEnable/disable HKDisable HK generation for S20Delivered to MOC1.0
AIWF050LEnable/disable HKDisable HK generation for OBCDelivered to MOC1.0
AIWF051ALoad science parametersLoad Reaction wheels frequencies and ENBALE/DISABLE RW filteringDelivered to MOC1.0
AIWF051BLoad science parametersLoad k-coefficientsDelivered to MOC1.0
AIWF051CLoad science parametersLoad Fbins maskDelivered to MOC1.0
AIWF051DLoad science parametersLoad filter parameters and ENABLE/DIABLE PAS filteringDelivered to MOC1.0
AIWF053AConfig COM I-Boom Depl.Configure LFR with specific config for the I-Boom deploymentDelivered to MOC1.3
AIWF053BConfig COM I-Boom Depl.Configure TDS with specific config for the I-Boom deploymentDelivered to MOC1.4
AIWF053CConfig COM I-Boom Depl.Configure Bias with specific config for the I-Boom deploymentDelivered to MOC1.6
AIWF053DConfig COM I-Boom Depl.Configure TNR-HFR with specific config for the I-Boom deployment - Config 1Delivered to MOC1.6
AIWF053EConfig COM I-Boom Depl.Configure TNR-HFR with specific config for the I-Boom deployment - config 2Delivered to MOC1.6
AIWF054AConfig COM Antennas Depl.Configure LFR with specific config for the Antennas deploymentDelivered to MOC1.3
AIWF054BConfig COM Antennas Depl.Configure TDS with specific config for the Antennas deploymentDelivered to MOC1.4
AIWF054CConfig COM Antennas Depl.Configure Bias with specific config for the Antennas deploymentDelivered to MOC

AIWF054DConfig COM Antennas Depl.Configure TNR-HFR with specific config for the Antennas deployment - Config Ant 1Delivered to MOC1.6
AIWF054EConfig COM Antennas Depl.Configure TNR-HFR with specific config for the Antennas deployment - config Ant 2Delivered to MOC1.6
AIWF054FConfig COM Antennas Depl.Configure TNR-HFR with specific config for the Antennas deployment - config Ant 3Delivered to MOC1.6
AIWF054GConfig COM Antennas Depl.Configure TNR-HFR with specific config for the Antennas deployment - config Full scanDelivered to MOC1.6

AIWF055A

Config COM Antennas rolls campaignConfigure LFR with specific config for the Antennas rolls campaign - config 1Delivered to MOC1.3

AIWF055B

Config COM Antennas rolls campaignConfigure LFR with specific config for the Antennas rolls campaign - config 2Delivered to MOC1.4

AIWF055C

Config COM Antennas rolls campaignConfigure TDS with specific config for the Antennas rolls campaignDelivered to MOC1.5

AIWF055D

Config COM Antennas rolls campaignConfigure BIAS with specific config for the Antennas rolls campaign - config 1 (Bias on resistance)Delivered to MOC1.0

AIWF055E

Config COM Antennas rolls campaignConfigure BIAS with specific config for the Antennas rolls campaign - config 2 (Bias on antenna)Delivered to MOC1.0

AIWF055F

Config COM Antennas rolls campaignConfigure TNR-HFR with specific config for the Antennas rolls campaignDelivered to MOC1.6

AIWF056A

Config COM SCM Noise campaignConfigure LFR with specific config for the SCM Noise campaignDelivered to MOC1.3

AIWF056B

Config COM SCM Noise campaignConfigure TDS with specific config for the SCM Noise campaignDelivered to MOC1.5

AIWF056C

Config COM SCM Noise campaignConfigure TNR-HFR with specific config for the SCM Noise campaignDelivered to MOC1.6

AIWF057A

Config COM Interference campaignConfigure LFR with specific config for the Interference campaign - config 1, 2, 3, 10Delivered to MOC1.3

AIWF057B

Config COM Interference campaignConfigure LFR with specific config for the Interference campaign - config 4,5,6,7Delivered to MOC1.3

AIWF057C

Config COM Interference campaignConfigure LFR with specific config for the Interference campaign - config 8Delivered to MOC1.3

AIWF057D

Config COM Interference campaignConfigure LFR with specific config for the Interference campaign - config 9Delivered to MOC1.3

AIWF057E

Config COM Interference campaignConfigure TDS with specific config for the Interference campaign - config 1Delivered to MOC1.5

AIWF057F

Config COM Interference campaignConfigure TDS with specific config for the Interference campaign - config 2Delivered to MOC1.5

AIWF057G

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 1 and 4 and 10Delivered to MOC1.0

AIWF057H

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 2Delivered to MOC1.0

AIWF057I

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 3Delivered to MOC1.0

AIWF057J

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 5Delivered to MOC1.0

AIWF057K

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 6Delivered to MOC1.0

AIWF057L

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 7Delivered to MOC1.0

AIWF057M

Config COM Interference campaignConfigure Bias with specific config for the Interference campaign - config 8 and 9Delivered to MOC1.0

AIWF057N

Config COM Interference campaignConfigure TNR-HFR with specific config for the Interference campaign - config 1Delivered to MOC1.6

AIWF057O

Config COM Interference campaignConfigure TNR-HFR with specific config for the Interference campaign - config 2Delivered to MOC1.6
AIWF058AConfig COM PAS filteringConfigure LFR with specific config for the PAS filteringDelivered to MOC1.0
AIWF058BConfig COM PAS filteringConfigure TDS with specific config for the PAS filteringDelivered to MOC1.0
AIWF058CConfig COM PAS filteringConfigure Bias with specific config for the PAS filteringDelivered to MOC1.0
AIWF058DConfig COM PAS filteringConfigure TNR-HFR with specific config for the PAS filteringDelivered to MOC1.0
AIWF059ADiagnosisPerform TDS DiagnosisDelivered to MOC1.1
AIWF370A"ping" (PUS, Service 17)Run a test connection (PUS, Service 17) with the TC_DPU_TEST_CONNECTION {ZIW00012} (i.e. "ping")Delivered to MOC1.0

Non-Routine sequences

Sequence nameDescriptionCategoryStatusComment






Commissioning specific sequences

Sequence nameOperationDescriptionStatusComment











Cruise Phase specific sequences

Sequence nameOperationDescriptionStatusComment





SVT1 specific sequences

Sequence NameDescriptionStatusLast sequence version delivered in package :Comments
AIWV001AEnable event generationDelivered to MOC1.4
AIWV001BDisable event generationDelivered to MOC1.4
AIWV001CEnable Science TM transferDelivered to MOC1.4
AIWV001DDisable Science TM transferDelivered to MOC1.4
AIWV002APatch LFR softwareDelivered to MOC1.4Wait for right addresses to change : P.Plasson will test them
AIWV002BPatch TDS softwareDelivered to MOC1.4Wait for right addresses to change : P.Plasson will test them
AIWV002CPatch TNr-HFR softwareDelivered to MOC1.4Wait for right addresses to change : P.Plasson will test them
AIWV002DPatch DAS softwareDelivered to MOC1.4Same as AIWF261A tested in IGST 42
AIWV003AReset all equipments (LFR, TDS, TNR-HFR)Delivered to MOC1.4
AIWV004ALoad the sun distanceDelivered to MOC1.4
AIWV004BReset TM bufferDelivered to MOC1.4
AIWV005AExecute Bias CommandDelivered to MOC1.4
AIWV005BSet Bias Frequency RippleDelivered to MOC1.4
AIWV005CSet Bias SweepDelivered to MOC1.4
AIWV005DSet Bias PageDelivered to MOC1.4
AIWV006AGeneric command to execute command on DPUDelivered to MOC1.4
AIWV007ALoad TNR-HFR Normal parameter 2 (HFR list 1)Delivered to MOC1.4
AIWV007BLoad TNR-HFR Normal parameter 3 (HFR list 2)Delivered to MOC1.4
AIWV007CLoad TNR-HFR Burst parameter 2 (HFR list 1)Delivered to MOC1.4
AIWV007DLoad TNR-HFR Burst parameter 3 (HFR list 2)Delivered to MOC1.6
AIWV007ELoad TNR-HFR Normal parameter 1Delivered to MOC1.6
AIWV007FLoad TNR-HFR Burst parameter 1Delivered to MOC1.6


ISM status


Data package delivery status

VersionStatusDelivery datePackage
1.0Delivered and implemented at MOC

 

1.1

Delivered and implemented at MOC

 

1.2Delivered and implemented at MOC

 

1.3Delivered and implemented at MOC

 

1.4Delivered and implemented at MOC

 

1.5Delivered and implemented at MOC

 

1.6Delivered and implemented at MOC

 

1.7

Delivered

 


Action-items related to the SVT1 datapackage

Key Summary T Created Updated Due Assignee Reporter P Status Resolution
Loading...
Refresh