This page is dedicated to a summary of all existing TC. The purpose is to cross check their use in one (or more) sequence using the following table.

Moreover, performed tests are reported in this table also.

In green, the TC which are in a sequence already tested.

In yellow, the TC which are in a sequence untested yet.

In red, TC which won't be in a sequence and are not tested yet.

In blue, unimplemented TC so no test is possible.


TC NameBelongs to the sequence named :Tested during:Using ETB versionTC Duration (s)Comments
DPU_ENABLE_HK

 AIWF050A

 

 
LFR_ENABLE_HK AIWF050B


 
TDS_ENABLE_HKAIWF050C 


 
THR_ENABLE_HKAIWF050D 


 
DPU_S20_ENABLE_HKAIWF050E 


 
DPU_OBC_ENABLE_HK

AIWF050F

IGST 4_2EM21 
DPU_DISABLE_HK

AIWF050G 




Disable DPU Housekeeping Parameter Report Generation. The command allows to disable one HK report at a time: the HK report is identified by its Structure ID. Pag. 185/236 DAS UM
LFR_DISABLE_HKAIWF050H 


 
TDS_DISABLE_HKAIWF050I 


 
THR_DISABLE_HKAIWF050J 


 
DPU_S20_DISABLE_HKAIWF050K 


 
DPU_OBC_DISABLE_HKAIWF050L



DPU_UPDATE_HK_PERIODAIWF032AIGST 4_2EM21 
DPU_UPDATE_HK_PERIOD

AIWF048B




DBS HK param
DPU_OBC_UPDATE_HK_PERIODAIWF032AIGST 4_2EM21 
LFR_UPDATE_HK_PERIODAIWF032A


 
TDS_UPDATE_HK_PERIODAIWF032A


 
THR_UPDATE_HK_PERIODAIWF032A


 
DPU_S20_UPDATE_HK_PERIODAIWF032AIGST 4_2EM21 
DPU_ENABLE_EVENT AIWV001A


Enable Event Report Generation. The command allows to enable several event report. Each event is identified by its report ID. Pag. 225 DAS UM
DPU_DISABLE_EVENT AIWV001B


Disable Event Report Generation. The command allows to disable several event report. Each event is identified by its report ID. Pag. 225 DAS UM
DPU_LOAD_MEMORYAIWV002DIGST 4_2EM21 
LFR_LOAD_MEMORY AIWV002A


p196 DAS UM Cannot be prepared in advance because we don't know the length of the change
TDS_LOAD_MEMORY AIWV002B


p196 DAS UM Cannot be prepared in advance because we don't know the length of the change
THR_LOAD_MEMORY AIWV002C


p196 DAS UM Cannot be prepared in advance because we don't know the length of the change
DPU_DUMP_MEMORYAIWV002DIGST 4_2EM21 
LFR_DUMP_MEMORY AIWV002A


  Cannot be prepared in advance because we don't know the length of the change
TDS_DUMP_MEMORY AIWV002B


  Cannot be prepared in advance because we don't know the length of the change
THR_DUMP_MEMORY AIWV002C


  Cannot be prepared in advance because we don't know the length of the change
DPU_CHECK_MEMORYAIWV002DIGST 4_2EM21 
LFR_CHECK_MEMORY AIWV002A


  Cannot be prepared in advance because we don't know the length of the change
TDS_CHECK_MEMORY AIWV002B


  Cannot be prepared in advance because we don't know the length of the change
THR_CHECK_MEMORY AIWV002C


  Cannot be prepared in advance because we don't know the length of the change
DPU_TEST_CONNECTIONAIWF370AIGST 4_2EM21 
DPU_ENABLE_SCIENCE AIWV001C


Enable DPU science TM transfer. Pag. 225 DAS UM
LFR_ENABLE_SCIENCE AIWV001C


 Enable DPU science TM transfer. Pag. 225 DAS UM
DPU_PID5_ENABLE_SCIENCE AIWV001C


 Enable DPU science TM transfer. Pag. 225 DAS UM
TDS_ENABLE_SCIENCE AIWV001C


 Enable DPU science TM transfer. Pag. 225 DAS UM
DPU_PID6_ENABLE_SCIENCE AIWV001C


 Enable DPU science TM transfer. Pag. 225 DAS UM
THR_ENABLE_SCIENCE AIWV001C


 Enable DPU science TM transfer. Pag. 225 DAS UM
DPU_DISABLE_SCIENCE AIWV001D


Disable DPU science TM transfer.  Pag. 225 DAS UM
LFR_DISABLE_SCIENCE AIWV001D


 Disable DPU science TM transfer.  Pag. 225 DAS UM
DPU_PID5_DISABLE_SCIENCE AIWV001D


 Disable DPU science TM transfer.  Pag. 225 DAS UM
TDS_DISABLE_SCIENCE AIWV001D


 Disable DPU science TM transfer.  Pag. 225 DAS UM
DPU_PID6_DISABLE_SCIENCE AIWV001D


 Disable DPU science TM transfer.  Pag. 225 DAS UM
THR_DISABLE_SCIENCE AIWV001D


 Disable DPU science TM transfer.  Pag. 225 DAS UM
DPU_SWITCH_OFF_EQUIPMENTAIWF047B


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047C


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047D


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047E


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047F


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047G


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047H


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047I


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_OFF_EQUIPMENTAIWF047K


Procedures ready  to be tested. Switch off instrument separately. 
DPU_SWITCH_ON_EQUIPMENTAIWF031AIGST 4_2EM21Switch on converter in a large procedure
DPU_SWITCH_ON_EQUIPMENTAIWF042AIGST 4_2EM21Switch on converter
DPU_SWITCH_ON_EQUIPMENTAIWF042EIGST 4_2EM220 Switch on Bias
DPU_SWITCH_ON_EQUIPMENTAIWF042F


 Switch on PA. Procedure ready to be tested
DPU_SWITCH_ON_EQUIPMENTAIWF042G


 Switch on SCM. Procedure ready to be tested
DPU_RESETAIWF046AIGST 4_2EM23 
DPU_ENABLE_WATCHDOGAIWF011A


 
DPU_DISABLE_WATCHDOG 


 Pag. 115 DAS UM
DPU_BOOT_DASAIWF030AIGST 4_2EM24 
DPU_BOOT_LFRAIWF031AIGST 4_2EM220 
DPU_BOOT_LFRAIWF042BIGST 4_2EM220 
DPU_BOOT_TDSAIWF031AIGST 4_2EM220 
DPU_BOOT_TDSAIWF042DIGST 4_2EM220 
DPU_BOOT_THRAIWF031AIGST 4_2EM220 
DPU_BOOT_THRAIWF042CIGST 4_2EM220 
DPU_DBS_LOAD_COMMON_PAR AIWF048A


Pag. 169 SSS UM .
DPU_DAS_LOAD_COMMON_PARAIWF032BIGST 4_2EM21 
DPU_LOAD_TEMP_PARAIWF032EIGST 4_2EM21 
DPU_LOAD_POWER_PARAIWF032CIGST 4_2EM21 
DPU_LOAD_SBM1_PARAIWF032GIGST 4_2EM21 
DPU_LOAD_SBM2_PARAIWF032HIGST 4_2EM21 
DPU_DBS_DUMP_PAR AIWF048A


Pag. 169 SSS UM .
DPU_DAS_DUMP_PARAIWF032AIGST 4_2EM21 
DPU_DAS_DUMP_PARAIWF032KIGST 4_2EM21 
DPU_ENTER_STANDBYAIWF045AIGST 4_2EM26 
DPU_ENTER_SERVICEAIWF031AIGST 4_2EM22 
DPU_ENTER_SERVICEAIWF043AIGST 4_2EM22 
DPU_ENTER_SURVEY_NORMALAIWF035AIGST 4_2EM22 
DPU_ENTER_SURVEY_BURSTAIWF035BIGST 4_2EM22 
DPU_ENTER_SURVEY_BACKUPAIWF044AIGST 4_2EM23 
DPU_ENTER_SBM_DETECTIONAIWF035CIGST 4_2EM23 
DPU_ENTER_SBM1_DUMPAIWF034D


This is a Debug TC. Nominally it is run by DPU. This TC will be used to force the Dump of SBM1 data during commissioning (see SSS p2016)
DPU_ENTER_SBM2_ACQ AIWF034E


This is a Debug TC. Nominally it is run by DPU. This TC will be used to force the Dump of SBM2 data during commissioning
DPU_ENABLE_TRANS_MODE 


Not enabled during flight. It is really needed?
DPU_DISABLE_TRANS_MODE 


Not enabled during flight. It is really needed?
DPU_ENABLE_COMPRESSIONAIWF041A


Procedures ready  to be tested. 
DPU_DISABLE_COMPRESSIONAIWF041B


Procedures ready  to be tested. 
DPU_ENABLE_INFO_PKT AIWF049A


 Pag. 175 DAS UM.
DPU_DISABLE_INFO_PKT  AIWF049B


 Pag. 175 DAS UM.
DPU_EXECUTE_BIAS_CMD

 AIWV005A




To run any generic BIAS TC Pag. 217 SSS.
DPU_SET_BIAS1AIWF031A



DPU_SET_BIAS1AIWF033B


Procedures ready  to be tested. 
DPU_SET_BIAS1AIWF036A


Procedures ready  to be tested. 
DPU_SET_BIAS1AIWF042E



DPU_SET_BIAS2AIWF031A



DPU_SET_BIAS2AIWF033B


Procedures ready  to be tested. 
DPU_SET_BIAS2AIWF036A


Procedures ready  to be tested. 
DPU_SET_BIAS2AIWF042E



DPU_SET_BIAS3AIWF031A



DPU_SET_BIAS3AIWF033B


Procedures ready  to be tested. 
DPU_SET_BIAS3AIWF036A


Procedures ready  to be tested. 
DPU_SET_BIAS3AIWF042E



DPU_SET_BIAS_RELAYAIWF031AIGST 4_2EM21
DPU_SET_BIAS_RELAYAIWF033B


Procedures ready  to be tested. 
DPU_SET_BIAS_RELAYAIWF033D


Procedures ready  to be tested. 
DPU_SET_BIAS_RELAYAIWF040A


Procedures ready  to be tested. 
DPU_SET_BIAS_RELAYAIWF042EIGST 4_2EM21
DPU_SET_BIAS_RFREQ AIWV005B


Not implemented in our commands probably needed for calibration (mail Vaivads 23 mar and 3 May 2017). An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml. A voir avec l'équipe BIAS
DPU_SET_BIAS_SWEEPAIWV005C


This procedure execute the BIAS sweep. We use the command start bias sweep to perform the Sweep. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml. Should be tested independently (not in a sequence)
DPU_SET_BIAS_MODEAIWF031A



DPU_SET_BIAS_MODEAIWF033B


Procedures ready  to be tested. 
DPU_SET_BIAS_MODEAIWF033D


Procedures ready  to be tested. 
DPU_SET_BIAS_MODEAIWF040A


Procedures ready  to be tested. 
DPU_SET_BIAS_MODEAIWF042E



DPU_SET_BIAS_MODEAIWF047A


Procedures ready  to be tested. 
DPU_SET_BIAS_PAGE

 AIWV005D




Selects the accessed register page. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml A voir avec l'équipe BIAS
DPU_EXECUTE_PDU_CMD AIWV006A


Generic telecommand controlling the PDU. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml
DPU_START_FROM_CONTEXT 


According to the DAS UM this TC is not implemented. However, an example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml Essayer de le jouer au sol mais pas sûr que ça marche
DPU_LOAD_BIAS_SWEEPAIWF033D


Procedures ready  to be tested. 
DPU_START_BIAS_SWEEPAIWF033D


Procedures ready  to be tested. 
DPU_START_BIAS_CALIB AIWF033B


Bias calibration has been performed by sequentially reproducing the calibration steps. Procedures ready  to be tested once validated by Bias team?
DPU_RESET_TM_BUFFER AIWV004B


 
DPU_CLEAR_HKAIWF032JIGST 4_2EM21 
DPU_START_TEST 


DAS UM pag. 297. Only for test purpose on ground. Shall not be include in a sequence
DPU_STOP_TEST 


DAS UM pag. 298. Only for test purpose on ground. Shall not be include in a sequence
DPU_LOAD_WAVEFORM_PARAIWF032FIGST 4_2EM21 
DPU_LOAD_SUN_DISTANCE

 AIWV004A





DPU_LOAD_BHV_PARAIWF032D


 Procedures ready  to be tested. 
DPU_CLEAR_BIAS_SWEEP AIWF033B-D


DAS UM pag. 261. Is it needed prior to load a new sweeping table
DPU_SAVE_CONTEXT 


According with the DAS UM this TC is not implemented. However, an example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml Essayer de le jouer au sol mais pas sûr que ça marche
DPU_LOAD_VSC_PARAIWF032IIGST 4_2EM21 
DPU_LOAD_RWF_PARAIWF051A


DAS UM pag. 182. Need a specific procedure to disabled reaction wheel frequencies filtering for LFR interference campaign
LFR_RESET AIWV003A


 LFR UM p23 : shall not be used. Shall be tested not in a sequence.
TDS_RESET AIWV003A


 No information in TDS UM ... probably the same than for LFR
THR_RESET AIWV003A


 No information in THR UM ... probably the same than for LFR
LFR_LOAD_COMMON_PARAIWF033DIGST 4_2EM21 
LFR_LOAD_COMMON_PARAIWF039CIGST 4_2EM21 
TDS_LOAD_COMMON_PARAIWF038AIGST 4_2EM21 
LFR_LOAD_NORMAL_PARAIWF039DIGST 4_2EM21 
TDS_LOAD_NORMAL_PARAIWF038EIGST 4_2EM21 
THR_LOAD_NORMAL_PAR_1AIWF037AIGST 4_2EM21 
THR_LOAD_NORMAL_PAR_2AIWV007A


 As we don't know how many frequencies we will put in the TC we cannot prepare the sequence in advance.
THR_LOAD_NORMAL_PAR_3 AIWV007B


 As we don't know how many frequencies we will put in the TC we cannot prepare the sequence in advance.
LFR_LOAD_BURST_PARAIWF039EIGST 4_2EM21 
TDS_LOAD_BURST_PARAIWF038FIGST 4_2EM21 
THR_LOAD_BURST_PAR_1AIWF037BIGST 4_2EM21 
THR_LOAD_BURST_PAR_2AIWV007C


  As we don't know how many frequencies we will put in the TC we cannot prepare the sequence in advance.
THR_LOAD_BURST_PAR_3

AIWV007D




 As we don't know how many frequencies we will put in the TC we cannot prepare the sequence in advance.
LFR_LOAD_SBM1_PARAIWF039AIGST 4_2EM21 
TDS_LOAD_SBM1_PARAIWF038BIGST 4_2EM21 
LFR_LOAD_SBM2_PARAIWF039BIGST 4_2EM21 
TDS_LOAD_SBM2_PARAIWF038CIGST 4_2EM21 
THR_LOAD_CALIBRATION_PARAIWF037CIGST 4_2EM21 
LFR_DUMP_PARAIWF034AIGST 4_2EM21 
TDS_DUMP_PARAIWF034AIGST 4_2EM21 
THR_DUMP_PARAIWF034AIGST 4_2EM21 
LFR_ENTER_MODE



 TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently.
TDS_ENTER_MODE



  TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently.
THR_ENTER_MODE





 TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently. 
LFR_ENABLE_CALIBRATIONAIWF033A


Procedure ready to be tested
THR_ENABLE_CALIBRATIONAIWF033C


 Procedure ready to be tested
LFR_DISABLE_CALIBRATIONAIWF033A


 Procedure ready to be tested
TDS_DUMP_NORMAL_TSWF AIWF034B


Check the sequence before testing
TDS_DUMP_SBM2_TSWF AIWF034C


no need for FP
TDS_PERFORM_DIAGNOSIS AIWF059A


 TDS UM : p23
TDS_LOAD_LFM_PARAIWF038DIGST 4_2EM21 
LFR_LOAD_FBINS_MASK AIWF051C


 LFR UM : p22

LFR_LOAD_KCOEFFICIENTSAIWF051B


TC to be run durnig the i inter calibration phase Quels paramètres?
LFR_DUMP_KCOEFFICIENTSAIWF034E


TC to be run durnig the i inter calibration phase Need a TM check ?
LFR_LOAD_FILTER_PARAIWF051D


TC to be run durnig the i inter calibration phase - See LFR RPW 6 doc config
  • No labels