You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

Dateoct. 12, 2017
Demandes
Getting issues...


Summary

Preparation of the IGST 4_2 data package for RPW:

  • The IGST 4_2 is planned to be run on the ETB with MEB EM2 on April 2018 
  • ISM doc. to be delivered at MOC before 
  • Procedure/sequence to be delivered at MOC before . 
  • MEB EM2 with IDB 4.3.3 will be used on ETB during test, however the procedures/sequences must be written using the PFM IDB 4.3.3 version (indicating clearly where there are discrepancies between the two versions).
  • Presence of 1-2 max. people from RPW at ESOC during test is strongly recommended by MOC

Interlocutors are:

  • Sylvain Lodiot at MOC

Main features of the release

  • Preparation of the RPW flight procedures/sequences for:
    • Switch-on,
    • Ping,
    • exercise the different modes and changes between them (test the state model in the ORCD),
    • dump with S6 of one of the instrument memories,
    • generate science if possible,
    • Text S22 (context saving) if applicable (Not applicable for RPW)
    • Switch-off.

  • Preparation of the related RPW Instrument State Model (ISM) doc. 

Description of the data package

  • List of RPW flight sequences (SQ) Excel files (one file per sequence), named as the sequence convention in the FOP Plan (FOPP) doc. The SQ files must be gathered by procedure (one directory per proceduce named as the procedure convention defined in the FOPP). The procedure directories must be grouped by type "FCP", "CRP" or "COM" (one directory per type).
  • The RPW ISM doc. in pdf format
  • The RPW MU updated with the procedure/sequences.
  • A README.rst text file providing information about the content of the package
  • a CHANGELOG.rst providing the changes history.

The name of the data package must be delivered as a zip file, named as: RPW_IGST4-2_DATAPACK_IssueXX_RevYY.zip, where XX and YY are the issue and revision of the data pack.

Main constraints

IGST RPW-related setup

The IGST will be run on the ETB with the RPW EM2.

In terms of command/control the RPW IDB (V4.3.3) is the same for EM1, EM2 and PFM, nevertheless the FDIR triggering threshold values can be different between the 3 models! This has to be taken account when validated the test results.

Moreover there is no SCM and PA-HF/ANT sensor on the ETB/RPW-EM2 setup, in consequence during the IGST :

  • Switching ON SCM shall be prohibited
  • BIAS HV shall be not used
  • Switching ON PA HF shall be prohibited


NOTE

According to Sylvain Lodiot (see comments at the bottom of the page) the corresponding prohibited TCs in the sequences must be clearly indicated with the  [not for the EM2 on the ETB] comment.

Status of the data package 

Sequences status

IGST mandatory sequences

The table gives the list of critical sequences required to perform the IGST test.

Sequence nameDescriptionCategoryStatusCommentChecking
AIWF001AFrom SAFE mode switch OFF the RPW prime power interface (UNIT_A and UNIT_B ) via OBCP. Switch-offIn preparation
  • TM checking related to transition and config added?
  • SL modifications ok?
  • Delta time ok?
  • File valid?
AIWF002AFrom SAFE mode switch OFF the RPW prime power interface (UNIT_A and UNIT_B ) via manual.Switch-offIn preparation
  • TM checking related to transition and config added
  • SL modifications ok?
  • Delta time ok?
  • File valid?
AIWF010ABoot RPW DBS in prime power interface (UNIT_A) via OBCPSwitch-onIn preparation
  • TM checking related to transition and config added
  • SL modifications ok?
  • Delta time ok?
  • File valid?
AIWF011A

Boot RPW DBS in prime power interface (UNIT_A) via manual

Switch-onIn preparation
  • TM checking related to transition and config added
  • SL modifications ok?
  • Delta time ok?
  • File valid?
AIWF030ABoot RPW DAS from EEPROM1 (default), EEPROM2, RAMTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF031AEnter SERVICE mode and switch on RPW equipmentTransition mode (nominal case)In preparation
  • TC prohibited tagged as [not for the EM2 on the ETB]?
  • Delta time ok?
  • File valid?
AIWF035AEnter SERVICE modeTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035BEnter in SCIENCE SURVEY_NORMAL submodeTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035CEnter in SCIENCE SURVEY_BURST submodeTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035DEnter in SCIENCE SURVEY_BACKUP submodeTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035EEnter in RPW STANDBY mode from any other mode (except OFF)Transition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035FEnter in SBM_DETECTION modeTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF035GGo to SAFE mode (DBS) with TC_DPU_RESET commandTransition modeIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032AConfigure THR for the RPW SCIENCE SURVEY_NORMAL mode.ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF040AConfigure the Bias (mode, and relay) for the RPW SCIENCE mode.ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032CConfigure THR for the RPW SCIENCE SURVEY_BURST mode. ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032AConfigure DPU and DAS + configure HK periodConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032ELoad common parameters of TDSConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032FConfiguration of TDS, LFR for SBM1 modeConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032GConfiguration of TDS, LFR for SBM2 modeConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032HConfigure TDS LFM parametersConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032ILoad calibration parameters for THRConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032JLoad common parameters of LFRConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032KConfigure TDS for the RPW SCIENCE SURVEY_NORMAL mode. ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032LConfigure LFR for the RPW SCIENCE SURVEY_NORMAL mode. ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032MConfigure TDS for the RPW SCIENCE SURVEY_BURST modeConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032NConfigure LFR for the RPW SCIENCE SURVEY_BURST mode.ConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF032OConfigure the Bias sweepingConfigurationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF260ADump DPU memory (TC_DPU_DUMP_MEMORY - Service 6)dump (S6)In preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF370ARun a test connection (PUS, Service 17) with the TC_DPU_TEST_CONNECTION {ZIW00012} (i.e. "ping")PingIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?

Extra sequences (required for the E2E 0th test)

Additionally to the sequences above, the following sequences shall not be run during the IGST, but are required to perform the E2E 0th test performed by the SOC (see RPW 0th E2E TEST DATAPACK RELEASE for more details).

Sequence nameDescriptionCategoryStatusCommentChecking
AIWF033AInternal Calibration for LFRCalibrationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF033BBIAS CalibrationCalibrationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF033CRun THR internal calibrationCalibrationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF033DExecute the BIAS sweepCalibrationIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF034ADump LFR, TDS, THR parametersDumpIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF036AConfiguration Bias1 currentConfiguration Bias CurrentIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF036BConfiguration Bias2 currentConfiguration Bias CurrentIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?
AIWF036CConfiguration Bias3 currentConfiguration Bias CurrentIn preparation
  • TM checking related to transition and config added
  • Delta time ok?
  • File valid?


ISM status

VersionStatusCommentChecking
1.0DeliveredDelivered with the datapack 1.0
1.1In preparation (required updates due to changes in SQ between data pack 1.0 and 1.1)

To be delivered with datapack 1.1.

  • Does the ISM is consistent with the list of delivered sequences?
  • Does the ISM fully cover the delivered sequences (and transitions)?

Data package delivery status

VersionStatusDelivery dateCommentChecking
1.0Delivered

 

Delivered to Sylvain Lodiot (MOC). See feedbacks in ROCOPE-81 - Getting issue details... STATUS


1.1To be delivered

Expected for  

To be delivered to Sylvain Lodiot (MOC)
  • Is the new naming convention for the sequences compliant?
  • Does the list of sequences is consistent with what has been decided with the MOC?
  • Does the RPW UM is up-to-date?
  • Does the datapack is complete?

Expected documentation


QuestionAnswerSeverityComment
Do the sequences related to the routine operations (Bias sweeping, calibrations, etc.) will be tested during the IGST?
Low





Attached items

Key Summary T Created Updated Due Assignee Reporter P Status Resolution
Refresh


  • No labels