This page is dedicated to a summary of all existing TC. The purpose is to cross check their use in one (or more) sequence using the following table.
Moreover, performed tests are reported in this table also.
In green, the TC which are in a sequence already tested.
In yellow, the TC which are in a sequence untested yet.
In red, TC which won't be in a sequence and are not tested yet.
In blue, unimplemented TC so no test is possible.
| TC Name | Belongs to the sequence named : | Tested during: | Using ETB version | Comments |
| DPU_ENABLE_HK | AIWF050A | |||
| LFR_ENABLE_HK | AIWF050B | |||
| TDS_ENABLE_HK | AIWF050C | |||
| THR_ENABLE_HK | AIWF050D | |||
| DPU_S20_ENABLE_HK | AIWF050E | |||
| DPU_OBC_ENABLE_HK | AIWF032K copy AIWF050F | IGST 4_2 | EM2 | |
| DPU_DISABLE_HK | AIWF050G | Disable DPU Housekeeping Parameter Report Generation. The command allows to disable one HK report at a time: the HK report is identified by its Structure ID. Pag. 185/236 DAS UM | ||
| LFR_DISABLE_HK | AIWF050H | |||
| TDS_DISABLE_HK | AIWF050I | |||
| THR_DISABLE_HK | AIWF050J | |||
| DPU_S20_DISABLE_HK | AIWF050K | |||
| DPU_OBC_DISABLE_HK | AIWF050L | |||
| DPU_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| DPU_UPDATE_HK_PERIOD | AIWF048C | DBS HK param | ||
| DPU_OBC_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| LFR_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| TDS_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| THR_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| DPU_S20_UPDATE_HK_PERIOD | AIWF032A | IGST 4_2 | EM2 | |
| DPU_ENABLE_EVENT | Enable Event Report Generation. The command allows to enable several event report. Each event is identified by its report ID. Pag. 225 DAS UM | |||
| DPU_DISABLE_EVENT | Disable Event Report Generation. The command allows to disable several event report. Each event is identified by its report ID. Pag. 225 DAS UM | |||
| DPU_LOAD_MEMORY | AIWF261A | IGST 4_2 | EM2 | |
| LFR_LOAD_MEMORY | p196 DAS UM | |||
| TDS_LOAD_MEMORY | p196 DAS UM | |||
| THR_LOAD_MEMORY | p196 DAS UM | |||
| DPU_DUMP_MEMORY | AIWF260A | IGST 4_2 | EM2 | |
| DPU_DUMP_MEMORY | AIWF261A | IGST 4_2 | EM2 | |
| LFR_DUMP_MEMORY | ||||
| TDS_DUMP_MEMORY | ||||
| THR_DUMP_MEMORY | ||||
| DPU_CHECK_MEMORY | AIWF261A | IGST 4_2 | EM2 | |
| LFR_CHECK_MEMORY | ||||
| TDS_CHECK_MEMORY | ||||
| THR_CHECK_MEMORY | ||||
| DPU_TEST_CONNECTION | AIWF370A | IGST 4_2 | EM2 | |
| DPU_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| LFR_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_PID5_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| TDS_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_PID6_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| THR_ENABLE_SCIENCE | Enable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| LFR_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_PID5_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| TDS_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_PID6_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| THR_DISABLE_SCIENCE | Disable DPU science TM transfer. Pag. 225 DAS UM | |||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047B | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047C | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047D | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047E | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047F | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047G | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047H | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047I | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_OFF_EQUIPMENT | AIWF047K | Procedures ready to be tested. Switch off instrument separately. | ||
| DPU_SWITCH_ON_EQUIPMENT | AIWF031A | IGST 4_2 | EM2 | Switch on converter in a large procedure |
| DPU_SWITCH_ON_EQUIPMENT | AIWF042A | IGST 4_2 | EM2 | Switch on converter |
| DPU_SWITCH_ON_EQUIPMENT | AIWF042E | IGST 4_2 | EM2 | Switch on Bias |
| DPU_SWITCH_ON_EQUIPMENT | AIWF042F | Switch on PA. Procedure ready to be tested | ||
| DPU_SWITCH_ON_EQUIPMENT | AIWF042G | Switch on SCM. Procedure ready to be tested | ||
| DPU_RESET | AIWF046A | IGST 4_2 | EM2 | |
| DPU_ENABLE_WATCHDOG | AIWF011A | IGST 4_2 | EM2 | |
| DPU_DISABLE_WATCHDOG | Pag. 115 DAS UM | |||
| DPU_BOOT_DAS | AIWF030A | IGST 4_2 | EM2 | |
| DPU_BOOT_LFR | AIWF031A | IGST 4_2 | EM2 | |
| DPU_BOOT_LFR | AIWF042B | IGST 4_2 | EM2 | |
| DPU_BOOT_TDS | AIWF031A | IGST 4_2 | EM2 | |
| DPU_BOOT_TDS | AIWF042D | IGST 4_2 | EM2 | |
| DPU_BOOT_THR | AIWF031A | IGST 4_2 | EM2 | |
| DPU_BOOT_THR | AIWF042C | IGST 4_2 | EM2 | |
| DPU_DBS_LOAD_COMMON_PAR | AIWF048A | Pag. 169 SSS UM . | ||
| DPU_DAS_LOAD_COMMON_PAR | AIWF032B | IGST 4_2 | EM2 | |
| DPU_LOAD_TEMP_PAR | AIWF032E | IGST 4_2 | EM2 | |
| DPU_LOAD_POWER_PAR | AIWF032C | IGST 4_2 | EM2 | |
| DPU_LOAD_SBM1_PAR | AIWF032G | IGST 4_2 | EM2 | |
| DPU_LOAD_SBM2_PAR | AIWF032H | IGST 4_2 | EM2 | |
| DPU_DBS_DUMP_PAR | AIWF048B | Pag. 169 SSS UM . Vérifier que on laisse bien la vérin de la TM (alors que la TC comporte des FP) ? Est ce qu'on ajoute les 3 param 189-190-191 pour vérin de la périodicité des HK ? | ||
| DPU_DAS_DUMP_PAR | AIWF032A | IGST 4_2 | EM2 | |
| DPU_DAS_DUMP_PAR | AIWF032L | IGST 4_2 | EM2 | |
| DPU_ENTER_STANDBY | AIWF045A | IGST 4_2 | EM2 | |
| DPU_ENTER_SERVICE | AIWF031A | IGST 4_2 | EM2 | |
| DPU_ENTER_SERVICE | AIWF043A | IGST 4_2 | EM2 | |
| DPU_ENTER_SURVEY_NORMAL | AIWF035A | IGST 4_2 | EM2 | |
| DPU_ENTER_SURVEY_BURST | AIWF035B | IGST 4_2 | EM2 | |
| DPU_ENTER_SURVEY_BACKUP | AIWF044A | IGST 4_2 | EM2 | |
| DPU_ENTER_SBM_DETECTION | AIWF035C | IGST 4_2 | EM2 | |
| DPU_ENTER_SBM1_DUMP | This is a Debug TC. Nominally it is run by DPU. This TC will be used to force the Dump of SBM1 data during commissioning (see SSS p2016) | |||
| DPU_ENTER_SBM2_ACQ | This is a Debug TC. Nominally it is run by DPU. | |||
| DPU_ENABLE_TRANS_MODE | Not enabled during flight. It is really needed? | |||
| DPU_DISABLE_TRANS_MODE | Not enabled during flight. It is really needed? | |||
| DPU_ENABLE_COMPRESSION | AIWF041A | Procedures ready to be tested. | ||
| DPU_DISABLE_COMPRESSION | AIWF041B | Procedures ready to be tested. | ||
| DPU_ENABLE_INFO_PKT | AIWF049A | Pag. 175 DAS UM. | ||
| DPU_DISABLE_INFO_PKT | AIWF049B | Pag. 175 DAS UM. | ||
| DPU_EXECUTE_BIAS_CMD | To run any generic BIAS TC Pag. 217 SSS. | |||
| DPU_SET_BIAS1 | AIWF031A | IGST 4_2 | EM2 | |
| DPU_SET_BIAS1 | AIWF033B | Procedures ready to be tested. | ||
| DPU_SET_BIAS1 | AIWF036A | Procedures ready to be tested. | ||
| DPU_SET_BIAS1 | AIWF042E | IGST 4_2 | EM2 | |
| DPU_SET_BIAS2 | AIWF031A | IGST 4_2 | EM2 | |
| DPU_SET_BIAS2 | AIWF033B | Procedures ready to be tested. | ||
| DPU_SET_BIAS2 | AIWF036A | Procedures ready to be tested. | ||
| DPU_SET_BIAS2 | AIWF042E | IGST 4_2 | EM2 | |
| DPU_SET_BIAS3 | AIWF031A | IGST 4_2 | EM2 | |
| DPU_SET_BIAS3 | AIWF033B | Procedures ready to be tested. | ||
| DPU_SET_BIAS3 | AIWF036A | Procedures ready to be tested. | ||
| DPU_SET_BIAS3 | AIWF042E | IGST 4_2 | EM2 | |
| DPU_SET_BIAS_RELAY | AIWF031A | IGST 4_2 | EM2 | |
| DPU_SET_BIAS_RELAY | AIWF033B | Procedures ready to be tested. | ||
| DPU_SET_BIAS_RELAY | AIWF033D | Procedures ready to be tested. | ||
| DPU_SET_BIAS_RELAY | AIWF040A | Procedures ready to be tested. | ||
| DPU_SET_BIAS_RELAY | AIWF042E | IGST 4_2 | EM2 | |
| DPU_SET_BIAS_RFREQ | Not implemented in our commands probably needed for calibration (mail Vaivads 23 mar and 3 May 2017). An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml. A voir avec l'équipe BIAS | |||
| DPU_SET_BIAS_SWEEP | This procedure execute the BIAS sweep. We use the command start bias sweep to perform the Sweep. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml. Should be tested independently (not in a sequence) | |||
| DPU_SET_BIAS_MODE | AIWF031A | IGST 4_2 | EM2 | |
| DPU_SET_BIAS_MODE | AIWF033B | Procedures ready to be tested. | ||
| DPU_SET_BIAS_MODE | AIWF033D | Procedures ready to be tested. | ||
| DPU_SET_BIAS_MODE | AIWF040A | Procedures ready to be tested. | ||
| DPU_SET_BIAS_MODE | AIWF042E | IGST 4_2 | EM2 | |
| DPU_SET_BIAS_MODE | AIWF047A | Procedures ready to be tested. | ||
| DPU_SET_BIAS_PAGE | Selects the accessed register page. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml A voir avec l'équipe BIAS | |||
| DPU_EXECUTE_PDU_CMD | Generic telecommand controlling the PDU. An example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml | |||
| DPU_START_FROM_CONTEXT | According to the DAS UM this TC is not implemented. However, an example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml Essayer de le jouer au sol mais pas sûr que ça marche | |||
| DPU_LOAD_BIAS_SWEEP | AIWF033D | Procedures ready to be tested. | ||
| DPU_START_BIAS_SWEEP | AIWF033D | Procedures ready to be tested. | ||
| DPU_START_BIAS_CALIB | AIWF033Bbis | Bias calibration has been performed by sequentially reproducing the calibration steps. Procedures ready to be tested once validated by Bias team? | ||
| DPU_RESET_TM_BUFFER | ||||
| DPU_CLEAR_HK | AIWF032J | IGST 4_2 | EM2 | |
| DPU_START_TEST | DAS UM pag. 297. Only for test purpose on ground. Shall not be include in a sequence | |||
| DPU_STOP_TEST | DAS UM pag. 298. Only for test purpose on ground. Shall not be include in a sequence | |||
| DPU_LOAD_WAVEFORM_PAR | AIWF032F | IGST 4_2 | EM2 | |
| DPU_LOAD_SUN_DISTANCE | Useful ? If yes, shall be implemented in a particular sequence | |||
| DPU_LOAD_BHV_PAR | AIWF032D | Procedures ready to be tested. | ||
| DPU_CLEAR_BIAS_SWEEP | DAS UM pag. 261. Is it needed prior to load a new sweeping table? It is not clear on the DAS UM. | |||
| DPU_SAVE_CONTEXT | According with the DAS UM this TC is not implemented. However, an example to test the TC is in email JMT 15/02/2018 attachment SFT CNES v3.3.xml Essayer de le jouer au sol mais pas sûr que ça marche | |||
| DPU_LOAD_VSC_PAR | AIWF032I | IGST 4_2 | EM2 | |
| DPU_LOAD_RWF_PAR | DAS UM pag. 182. Need a specific procedure to disabled reaction wheel frequencies filtering for LFR interference campaign | |||
| LFR_RESET | LFR UM p23 : shall not be used. Shall be tested not in a sequence. | |||
| TDS_RESET | No information in TDS UM ... probably the same than for LFR | |||
| THR_RESET | No information in THR UM ... probably the same than for LFR | |||
| LFR_LOAD_COMMON_PAR | AIWF033D | IGST 4_2 | EM2 | |
| LFR_LOAD_COMMON_PAR | AIWF039C | IGST 4_2 | EM2 | |
| TDS_LOAD_COMMON_PAR | AIWF038A | IGST 4_2 | EM2 | |
| LFR_LOAD_NORMAL_PAR | AIWF039D | IGST 4_2 | EM2 | |
| TDS_LOAD_NORMAL_PAR | AIWF038E | IGST 4_2 | EM2 | |
| THR_LOAD_NORMAL_PAR_1 | AIWF037A | IGST 4_2 | EM2 | |
| THR_LOAD_NORMAL_PAR_2 | AIWF037F | HFR frequencies list can contain up to 100 frequencies. I put 100 possible CMD param. | ||
| THR_LOAD_NORMAL_PAR_3 | AIWF037G | HFR frequencies list can contain up to 100 frequencies. I put 100 possible CMD param. | ||
| LFR_LOAD_BURST_PAR | AIWF039E | IGST 4_2 | EM2 | |
| TDS_LOAD_BURST_PAR | AIWF038F | IGST 4_2 | EM2 | |
| THR_LOAD_BURST_PAR_1 | AIWF037B | IGST 4_2 | EM2 | |
| THR_LOAD_BURST_PAR_2 | AIWF037H | HFR frequencies list can contain up to 100 frequencies. I put 100 possible CMD param. | ||
| THR_LOAD_BURST_PAR_3 | AIWF037I | HFR frequencies list can contain up to 100 frequencies. I put 100 possible CMD param. | ||
| LFR_LOAD_SBM1_PAR | AIWF039A | IGST 4_2 | EM2 | |
| TDS_LOAD_SBM1_PAR | AIWF038B | IGST 4_2 | EM2 | |
| LFR_LOAD_SBM2_PAR | AIWF039B | IGST 4_2 | EM2 | |
| TDS_LOAD_SBM2_PAR | AIWF038C | IGST 4_2 | EM2 | |
| THR_LOAD_CALIBRATION_PAR | AIWF037C | IGST 4_2 | EM2 | |
| LFR_DUMP_PAR | AIWF034A | IGST 4_2 | EM2 | |
| TDS_DUMP_PAR | AIWF034A | IGST 4_2 | EM2 | |
| THR_DUMP_PAR | AIWF034A | IGST 4_2 | EM2 | |
| LFR_ENTER_MODE | TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently. | |||
| TDS_ENTER_MODE | TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently. | |||
| THR_ENTER_MODE | TC executed when TC_DPU_ENTER_MODE is sent.. No need for a specific sequence. Shall be tested independently. | |||
| LFR_ENABLE_CALIBRATION | AIWF033A | Procedure ready to be tested | ||
| THR_ENABLE_CALIBRATION | AIWF033C | Procedure ready to be tested | ||
| LFR_DISABLE_CALIBRATION | AIWF033A | Procedure ready to be tested | ||
| TDS_DUMP_NORMAL_TSWF | AIWF034B | Check the sequence before testing | ||
| TDS_DUMP_SBM2_TSWF | AIWF034C | no need for FP | ||
| TDS_PERFORM_DIAGNOSIS | TDS UM : p23 | |||
| TDS_LOAD_LFM_PAR | AIWF038D | IGST 4_2 | EM2 | |
| LFR_LOAD_FBINS_MASK | LFR UM : p22 Shall be implemented in a specific procedure | |||
| LFR_LOAD_KCOEFFICIENTS | TC to be run durnig the i intercalibration phase | |||
| LFR_DUMP_KCOEFFICIENTS | TC to be run durnig the i intercalibration phase | |||
| LFR_LOAD_FILTER_PAR | TC to be run durnig the i inter calibration phase - See LFR RPW 6 doc config | |||